產品資料

AT2327靈活,可靠的多通道固定輻射監測系統

如果您對該產品感興趣的話,可以
產品名稱: AT2327靈活,可靠的多通道固定輻射監測系統
產品型號: AT2327
產品展商: 阿通特斯ATOMTEX
產品文檔: 無相關文檔

簡單介紹

AT2327為一自動的靜態裝置,在現場提供連續的輻射監測。 操作原理以伽瑪輻射智慧型探針BDKG-11/1和/或BDKG-11/2(SP)為基礎,*多可裝置10支智慧型探針。 當運輸車輛穿過監視區域,遮住紅外線光束,便啟動所有的智慧型探針,自動從背景量測模式切換到偵測模式。 當超過預設的計數率的門檻時,便由聲音和視覺警報單元(AU)警告人員偵測到伽瑪源。 量測期間所測得的計數率數據,由每一探針經由


AT2327靈活,可靠的多通道固定輻射監測系統  的詳細介紹
產品介紹:
*俄羅斯ATOMTEX公司,在測量儀器和核輻射劑量領域已有30多年的經驗,共有高技能的工作人員和核輻射專家130多人,以及在設計和研發方面的擁有其成熟的機制。他們將其與高智能自動化的生產設備相結合,使其產品無論是質量還是性能都達到了世界上等水平,且在核輻射檢測業內久享盛譽。
*ATOMTEX公司生產的儀器主要應用在核工業,放射生態學,應急,民防,放射性和核材料的監測,非法販運物的檢測,放射性廢物監測,計量,特種設備和科學研究等等領域。
*ATOMTEX公司生產的產品主要有:電子個人劑量儀,便攜式劑量儀,標準劑量儀,輻射監測儀,便攜式射線頻譜儀,固定式射線頻譜儀,輻射監測系統,伽馬輻射儀,輻射劑量校準系統,移動輻射監測實驗室,智能探頭固定劑量裝置。
*俄羅斯Atomtex AT2327輻射監測儀

作為眾多知名品牌的合作伙伴,LBK萊博科技以其優良的品質和服務與閣下攜手建立戰略合作。


產品技術參數:
BDKG-11/1在137Cs敏感度1960 cps/mSv.h-1
BDKG-11/2在137Cs敏感度4900 cps/mSv.h-1
BDKG-11/1在60Co敏感度1030 cps/mSv.h-1
BDKG-11/2在60Co敏感度2500 cps/mSv.h-1
伽馬射線測試范圍:0.05-3 MeV
測試結果不穩定性:5%
*長測量時間:20秒
*大檢測深度:5000 mm
產品防護等級:IP 57
ALARM DOSIMETER AT2327
 

 Flexible and reliable multichannel stationary radiation monitoring system to perform environmental and area radiation monitoring of radiation-sensitive rooms and targets

Features

- Gamma and neutron radiation smart probes  
- Independent measuring in each channel within wide gamma and neutron radiation dose rate and neutron radiation flux desnity ranges  
- Audible and visual alam at threshold exceeding for each smart probe  
- High reliability  
- Failure diagnostics  
- Database of dose rate values and alarm threshold excesses  
- Applied software to display current radiation environment in real time  
- Backup power unit  
- Mobile one-channel design  


Application

- Nuclear industry
- Radiology
- Industry
- Radioisotope and dosimetry laboratories
- Civil defense


The alarm dosimeter consists of gamma radiation smart probes (AT2343, BDKG-02, BDKG-08) and neutron radiation smart probes (BDKN-02, BDKN-04) (SP). The smart probes are completely independent instruments measuring gamma and neutron radiation dose rate and neutron radiation flux density every 2 s and triggering audible and visual alarm. One or several audible and visual alarm units (AU) may be connected to each smart probe to notify the staff in the case of radiation hazard. Data from smart probes are transferred to the processing unit via RS-485.
The processing unit displays measured values of the selected smart probe and real time. Alarm threshold exceeding or a failure of any system units is accompanied by audible and visual signals showing symbolically the problem location on the display. The processing unit is intended to setup thresholds for each smart probe, monitor smart probe state, correct the real-time clock, protect several service functions with a password, review dose rate and threshold exceeding history of any smart probe.
When PC is used as a part of a radiation monitoring system, applied software running under Windows 2000 is intended to configure the system, read out readings and process them.
The map of the monitoring area or target and dose rate values as charts and tables in measuring posts are displayed on PC. Alarm threshold exceeding in any smart probe or failure of any system units are displayed on PC as color zones and accompanied by audible alarm. Measured dose rate values in measuring post are stored in a database (Microsoft Access-2000).

Specification
 
Number of smart probes in one alarm dosimeter from 1 to 10
Number of alarm dosimeters in one radiation monitoring system connected to PC 32
Ambient dose equivalent rate measuirng range  
gamma radiation  
BDKG-02 0.1 µSv/h - 10 µSv/h
BDKG-08 0.1 µSv/h - 5 Sv/h
АТ2343 25 nGy/h - 10 Gy/h
neutron radiaiton  
BDKN-04 0.1 µSv/h - 10 mSv/h
Neutron radiation flux density measuring range 0.1 - 104 neutron/(cm2·s)
Sensitivity on 137Cs 15000 count/µSv
Gamma radiation energy range 0.05-3 MeV
Detecting neutron radiation measuring range 0.025 eV - 14 MeV
Intrinsic measurement error ± 15 %
Operating temperature range  
smart probes -30 - +50°С
other units +5 - +40°С
Interface (cable communication) RS 485
3-level audible and visual alarm  
Maximum distance between a smart probe and the processing unit (cable communication) 1000 m
Protection class  
smart probes IP57
other units IP54
Radio disturbance  
CEI/IEC CISPR 22:1997  
Electromagnetic compatibility  
CEI/IEC 61000-4-2:1995  
IEC 61000-4-3:1995  
Power requirements  
AC mains 220 (+22;-33)V, 50±2 Hz
Accumulator battery at emergency 12.6 (+1.3; -1.6) V or 25.2 (+2.6; - 3.2) V




Complete set: processing unit, smart probes AT2343, BDKG-02, BDKG-08, BDKN-02, BDKN-04, alarm units, terminal-block boxes, AC adapters, Manual, set of assembly parts and accessories.

Backup power unit, applied software, PC and interface adapter are options and they are supplied on additional order.

The alarm dosimeter AT2327 has pattern approval certificates of Republic of Belarus, Russian Federation, Ukraine and Kazakhstan.

It complies with IEC 61017-7 International standard requiremnts. It also confoms with the 89/336/EEC Directive complying with EN 61000-6-3, EN 61000-6-2, EN 50371 and EN 61010-1 standard requirements.

產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!

GMC杰目測變送器,NMP氣體探測器,NMP氣體監測裝置,NMP氣體探測器TS-1100Ex,涂布機NMP氣體TS-1100Ex,GASTRON

粵公網安備 44049102496292號

最笨重的生肖中特 浙江体彩6十1什么时候开奖的 重庆幸运农场大神玩法 2007七乐彩玩法走势图 pk10长期稳赚6码 福利彩票排列7结果 宁夏11选5哪个平台有 p2p投资理财平台靠谱吗 福建快3玩法 股票分析师报考条件 2019上证指数年线